|
   |
   |
  |
         
|
Original Policy: Revised Policy: Governing Board Approval: June 11, 1993
In 1982, the Governing Board adopted an identifying "logo" device that would be unique to the Council and adaptable for use in a wide variety of printed materials, e.g., IBAC letterhead, news releases, brochures, posters. Member Organizations also could use the logo on their own printed materials, provided that the words "Member of" were properly stated. Attached, as Page 2 of this policy are examples of use of the logo in various sizes and contexts, along with information stating restriction, name of typeface and use of colors.
Source of Policy: (1) Governing Board Minutes, Page 3, Montreal, January 20-21, 1982, and attachment to Minutes containing sample uses.
Attachment - Procedures
for use of the Logotype Device The IBAC identification
device can be used by any Council member organization to indicate its
affiliation. The device can be used on letterheads, publications and the
like, but must for continuity purposes, conform to one of the three formats
shown. Any size is acceptable. Note that the words "member"
or "member of" are compul-sory. The specified typeface is Helvetica
for "member of" or "member" and elvetica bold for
the council name. When possible the logotype should be reproduced in PMS-295
blue and words in PMS-424 gray, but this is not mandatory. Please address
questions to the International Business Aviation Council, Ltd. Secretariat. |
 
|
|
||
Policy
40-5
